There are several ways to fix IPS glow. One of the most effective solutions is to adjust your monitor’s brightness and contrast settings. You can minimize the glow by reducing the brightness and increasing the contrast without sacrificing the overall picture quality. Another option is to use bias lighting, which involves placing a light source behind the monitor to reduce the contrast between the screen and the surrounding environment.
In addition to these solutions, other methods can help reduce IPS glow, such as changing the viewing angle, adjusting the gamma settings, and using a screen filter. By implementing these tips, you can improve the picture quality of your monitor and enjoy a better viewing experience.
Identifying IPS Glow
IPS glow is a common issue that occurs in IPS monitors. It is a phenomenon where the monitor’s backlight bleeds through the edges of the panel, resulting in a noticeable glow. It is not to be confused with backlight bleeding, which is a different issue altogether.
To identify IPS glow, one must observe the monitor in a dark environment with a dark image displayed on the screen. The glow will appear as a hazy or cloudy area around the edges of the screen. The glow will be more prominent in the corners of the monitor, and it will become less noticeable as you move toward the center of the screen.
It is essential to note that IPS glow is not a monitor defect. It is a natural characteristic of IPS panels and is caused by their design. The glow is more noticeable on larger screens and monitors with higher resolutions.
One can adjust the monitor’s brightness and contrast settings to minimize the effect of IPS glow. Lowering the brightness can reduce the light bleeding through the panel, making the glow less noticeable. However, keeping the brightness a little is important, as this can affect the overall image quality.
By adjusting the monitor’s brightness and contrast settings, one can minimize the effect of IPS glow and enjoy a better viewing experience.
How to Fix IPS Glow? Step By Step Guide
Adjusting the monitor settings is one of the easiest ways to fix IPS glow. Here are some settings you can try:
- Brightness: Lowering the brightness can help reduce IPS glow. However, make sure not to lower it too much, as it can affect the overall picture quality.
- Contrast: Adjusting the contrast can also help reduce IPS glow. Increasing the contrast can make the dark areas of the screen darker and reduce the amount of light bleeding.
- Gamma: Adjusting the gamma can help improve the overall picture quality and reduce the IPS glow. Gamma affects mid-tone brightness, so tweaking it can help reduce the amount of light bleeding.
- Color Temperature: Changing the color temperature can also help reduce IPS glow. Try setting it to a cooler temperature, which can help reduce the amount of light bleeding.
Not all monitors have the same settings, so it’s best to consult the user manual or the manufacturer’s website for specific instructions on adjusting the settings.
In addition to adjusting the settings, it’s also important to ensure the monitor is positioned correctly. Ensure it’s not too close to a window or a light source, which can cause reflections and increase IPS glow.
Changing Viewing Environment
The viewing environment can significantly impact the appearance of IPS glow. Therefore, it is essential to optimize the viewing environment to reduce the effect of IPS glow. Here are a few things that can be done to change the viewing environment:
- Dim the lights: One of the most effective ways to reduce IPS glow is to dim the lights in the room. This will reduce the ambient light reflecting off the screen and make the glow more visible.
- Adjust the screen brightness: Another way to reduce IPS glow is to adjust the brightness. Lowering the brightness can reduce the light reflecting off the screen and make the glow more visible.
- Change the viewing angle: Changing the viewing angle can also help to reduce the effect of IPS glow. Experiment with different angles to find the one that minimizes the glow.
- Use a bias lighting system: A bias lighting system can create a soft, ambient light behind the screen. This can help to reduce the contrast between the screen and the surrounding environment, making IPS glow less noticeable.
- Avoid bright colors: Bright colors can make IPS glow more visible. Therefore, avoiding using bright colors on the screen is recommended, especially in dark environments.
By changing the viewing environment, it is possible to reduce the effect of IPS glow and improve the overall viewing experience.
Using Bias Lighting
Bias lighting is a technique that involves placing a light source behind the monitor to reduce the contrast between the screen and the surrounding environment. This technique can +help to reduce the appearance of IPS glow and make the viewing experience more comfortable.
The idea behind bias lighting is to create a soft, ambient light that illuminates the wall behind the monitor. This light should be bright enough to reduce the contrast between the screen and the surrounding environment but not so bright that it creates glare or other distractions.
Here are a few things to remember when using bias lighting to reduce IPS glow.
First, the light source should be positioned behind the monitor, not in front. This will help to reduce the amount of light that reflects off the screen and into the viewer’s eyes.
Second, the color temperature of the light source is important. Ideally, the light should be a warm white or a neutral white rather than a cool white or blue. This will help to create a more natural-looking environment and reduce eye strain.
Finally, the brightness of the light source should be adjusted to suit the viewing environment. If the room is very dark, the light source may need to be brighter to reduce the contrast between the screen and the surrounding environment. If the room is well-lit, the light source may need to be dimmer to avoid creating glare or other distractions.
Bias lighting is a simple and effective technique for reducing IPS glow and improving the viewing experience. By following these simple tips, users can create a comfortable and natural-looking environment that is easy on the eyes.
